2. Home
  3. Resistor
  4. High Voltage
  5. High Value Non-Inductive Thick Film
  6. FA80

FA80

Hymeg Resistors

FA80

Hymeg Resistors

FA80

Specifications
Power (W) 2
VDC 5000
Min Resistance 1M
Max Resistance 400G

 

The FA Series was designed to meet the growing need for higher resistance values in a smaller package size. TheFA Series has not only done this but also delivers true non-inductive performance. Values up to 4 Tera Ohms areavailable while still maintaining all the advantages of thick film resistors.

DOWNLOAD DATASHEET

FEATURES:

• Voltage coeefficients from .5 ppm to 5.0 ppm depending on value
• TCR range 25 ppm to 250 ppm depending on value when tested from 0°C to 70°C
• Tolerances from 1% to 20%
• Non-inductive performance
• High temperature tin/silver solder pads, able to pass MIL-STD-202, Method 107D, test conditions C-1
•Testing per MIL-PRF-49462
•100% testing of voltage coefficients from 1.0 VDC up to 10,000 VDC, per MIL-STD-202, Method 309
• Custom Designed parts to meet your physical and electrical needs
• Gold contacts to insure linearity of resistance below 10 VDC
• Available in axial or radial leaded design

ENVIRONMENTAL PERFORMANCE:

Load Life: 1,000 hours at rated voltage at +70°C, not to exceed rated power, ?R, 0.25% Max.
Overvoltage/Overload: 1.5 times rated voltage, not to exceed 5 times rated power for 10 sec.,?R, 0.30% Max.
Thermal Shock: MIL-STD-202, Method 107, Cond.F, ?R, 0.10% Max.
Moisture Resistance: MIL-STD-202, Method 106,?R, 0.50% Max.
Insulation Resistance: 10,000 Megohms minimum, at 750 volts DC.
Shelf Life: 1 year at +25°C, ?R, 0.10% Max.
Dielectric Strength: MIL-STD-202, Method 301,?R, 0.25% Max.
Voltage Coefficient: 0.5ppm Max. when tested per MIL-STD-202, Method 309

EXAMPLE PART #:  FA80 - 50G - 1% - H